Anti-friction boundary lubricant, 1 to 2 microns fineness. Guaranteed purity.

Anti-friction boundary lubricant, colloidal suspension in oil at 5%, 10% and 12%

It is a very fine and well-stylized colloidal dispersion with a high concentration of colloidal electrographite, in a special lubricating oil, developed to allow its incorporation into oils for internal combustion engines, where it ensures a lubricating and anti-friction action that lasts even at high temperatures and no matter how forced the work to which the engine is subjected, preventing the wear of rings, cylinders, connecting rods, main bearings, valve guides, etc., that is, all the moving parts, very useful in foundries, extrusions, drawing, etc.

It is a water-soluble, fluid gel electrographite dispersion with characteristics suitable for this product. It has a liquid consistency and a thixotropic flow, facilitating application and the creation of a smooth, uniform layer. It dries quickly in the open air, forming a hard, non-stick, and lubricating film, useful in heavy-duty forging operations, extrusion, and metal casting of materials such as zinc, aluminum, manganese, copper, bronze, lead, etc. Due to its high graphite content, it possesses high electrical conductivity. It can be applied by brush or spray gun, for which it dissolves easily in water.
It does not drip when applied to vertical surfaces, allowing for the secure coverage of edges and corners. This product is formulated with high-quality, non-flammable graphite, offers long die durability, and ensures workplace safety. It is another environmentally friendly product that does not harm health or the environment.

It is a dispersion of colloidal graphite in isopropyl alcohol within a hard, adherent resin that cures in a few minutes through solvent evaporation alone, behaving in this respect like a common lacquer, but with remarkable properties. The dry film is an excellent solid lubricant with very good electrical conductivity. It has excellent adhesion to glass and metal properly prepared for painting. It is advantageously used in the glass industry, for tool treatment, engine assembly, electroplating and chrome plating workshops, the naval and military industries, etc. It has a fluid and thixotropic consistency, allowing for easy application without dripping from edges, corners, and vertical surfaces. It has little tendency to settle in the container, despite its high graphite content, which is 26% in the paint and 76% in the dry film.

This product is also available in aerosol packaging for easier use in hard-to-reach places.

Colloidal graphite dispersion in oil with 18% solids.

This is an excellent extreme pressure, low-friction, and anti-wear additive composed of ultrafine particles of high-purity colloidal graphite, fully stabilized in a medium plow oil.

The carrier oil has been specifically selected for its compatibility with a wide range of lubricants and process oils. When used in industrial oils, it improves oil performance by facilitating lubrication under extreme conditions and preventing metal-to-metal contact, while also enhancing performance at high temperatures.

It is a non-toxic product.

It is a graphite wax stick formulated to lubricate various types of mechanical processes, forming an excellent film resistant to high temperatures and extreme pressures.

It is recommended for extruding aluminum, copper, brass, etc. It can be applied by simply placing the product near the surface, depending on the application area.

It is a paste made with a high graphite content and other additives, which gives it the ability to withstand high temperatures and pressures, forming a more resistant film. It is recommended for lubricating various mechanisms, including aluminum, bronze, and other metal casting dies. It is also suitable for extruding aluminum, brass, copper, and other metals.

This product can be applied using swabs, depending on the application area.

– Different types of mesh.
– Lamellar or amorphous.
– High purities.

Oils, waters, alcohols, etc.

Made of pure quebracho, ecological in mesh sizes of 50, 100, 225, and 325 fineness, for different industries.

For filtering zinc in the metallurgical industry that produces wire rod.

It is a product made from solid organic elements used for cleaning turbine compressors of all generations and parts manufactured from magnesium, effectively removing carbon deposits, salts, lubricants, and atmospheric contaminants.
When cleaning stationary, naval, or aeronautical turbines without disassembly, a decrease in temperature and a progressive increase in power can be observed within minutes of operation. It is essential to manufacture it under strict international specifications, such as the standards set by the U.S. Department of Defense MIL-G-5634C-Type I, and it is constantly verified by the I.N.T.I. (National Institute of Industrial Technology). It produces no environmental contamination, allowing us to assert that the sum of all these advantages indicates that we have a solid cleaner developed for the future. It is truly an excellent ally for your turbine. We perform on-site cleaning with our technical team.